The hand hygiene takes place in four steps. Firstly, the liquid soap is obtained via two sensor-controlled nozzles. In a second step, the hands and forearms are cleaned under flowing water. This is followed by the drying of the hands with paper drying or warm-air-dryer incl. air filter.  Before leaving the hygiene sluice hand disinfection takes place. The motorized turnstile only provides free access to the production area once the full hand hygiene process has been completed. All of the steps described above are activated on a contact-free basis. Due to the separate design of hand cleaning and disinfection, the machine can be used by several people at the same time.

The sole cleaning and disinfection takes place with two sole cleaning brushes with a length of 1,000 or 1,600 mm in continuous process, parallel to hand hygiene.

The second lane is equipped with a motor driven turnstile which blocks the passage and only allows passage in the exit direction.

Options:

• Available as platform version or shaft type installation at floor level
• Possible to mount a sole edges section
• Dry execution with dirt collecting drawer